Requirements for electronic equipment (PSE)

Updated: July 2024, 3

Is the condition of the AC equipment including the goods acceptable?

The medical equipment is equipped with all kinds of electrical appliances and AC equipment for urban distribution.
Unfortunately, every year in the city, there are fire accidents caused by AC equipment.
Therefore, it is necessary to use the machine and confirm the safety of the AC regulator.
Please ensure safety and establish PSE certification system.

First of all, PSE certification is this?

PSE certification is based on the Japanese Electrical Appliances Safety Law and is based on the Japanese Electrical Appliances Safety Law.
PSE certification is a necessary certification to ensure the safety of electrical appliances, and PSE certification is required for electrical products for domestic use in Japan.
　
The following comprehensive provisions are subject to law.
　

The ``Electrical Equipment Safety Law'' has been in effect to promote the production of electrical equipment, quality, etc., and promote the independent activities of private enterprises to ensure the safety of electrical equipment, and to prevent the possible production of electrical equipment from hazardous materials.

Origin: Article 1 of the Electrical Equipment Safety Act

457 items specified by the government ordinance are designated as regulated goods (called "electronic appliances"), among which are designated as products that are dangerous or harmful, such as batteries, fire hazards, etc. “Specific electrical supplies”, 116 shared items. (Article 2 of the Act)
　

The matter applies to "electronic supplies" product manufacturing or business enterprises (hereinafter referred to as "provision business operators"), demand development, industry minister's business start-up plans (Article 3 of the Law), and technical compliance standards (Law). Article 8) Etc. Duties. The completion of the performance of the work may be carried out in a trivial manner, and the work itself must be certified as a legal guideline. (Article 10 of the Act)
　

In addition, there are uninstallable electronic equipment based on the legal regulations (Article 27 of the Law), unfulfilled statutory documentation, acceptance of documents, etc.

Is this the case with the control model?

In the Electrical Equipment Safety Law, the regulations are as follows.
　

A part of a general-use electric facility (general-use electric facility as specified in Article 38 of the Electric Works Act (Act No. 170 of 1960), Section 1); Instruments, instruments, materials, etc. used in conjunction with electrical workpieces
　
Portable phone according to government ordinance
　
Storage battery specified by government ordinance

　
Specifically, the Electrical Equipment Safety Law Enforcement Ordinance (Cabinet Order) specifies that 457 items will be designated as clean formats.
(Article 2 of the Electrical Equipment Safety Act, Tables XNUMX and XNUMX of the Act)

PSE certification procedure        

1. Business plan: Business plan to proceed within 30 days from the start of business.
2. Technical standard compliance: Check whether the electrical equipment is suitable or not according to the Japanese national technical standard.
3. Adaptability test (for use with specific electrical equipment): Specific electrical equipment demand is determined by the operating performance of the machine.
4. Voluntary policy: Voluntary policy for owning electricity supplies.
5. PSE name: After playing the game, it is possible to show PSE name.
   Other information, such as business name, standard electricity, national standards, and demand and progress specifications.
6. Sales

1. Business plans (Articles 3 to 6 of the Telecommunications Law)

As a result of the electrical equipment manufacturing business or the start-up business, it is necessary for the current business to start working within 30 days of inward management and planning for the necessary operations of the industrial department, etc. At this time, the first ``electronic supplies manufacturing (operation) business planning book'' implementation plan was established.

◎Business planning book

Electrical supplies operating business operator, staff member and other three departments are subject to change, and there is a plan to immediately implement the plan, however, the name and name of the representative of the company will not be changed.

• Business owner's full name or company name and address
• Technical classification of electrical equipment types
• Product name and location

◎Electrical supplies operation business plan book

When the electricity supply business starts and ends, the necessary steps will be taken.
As a result, the electricity supplies manufacturing (operation) business operation plan will not be repeated in the future, and the demand will be met.

2. Technical Standards Compliance (Article 8, Subsection 1 of the Telecommunications Act)

The technical standards established by the Ministerial Ordinance for the production of electronic products or the technical standards for electronic products required for the production of electronic products, and the related work.
　
《Answering the standard technical requirements for the technical requirements of the Ministry of Standards and Regulations》The first notice is that the above-mentioned ministerial ordinances have been carried out for a concrete explanation, but the details are clearly defined, and the contents of the technical requirements for the technical requirements of the relevant ministerial regulations have been clearly explained. See 释、选聚. The ministerial regulations are capable of ensuring safety and horizontal technology standards are established, but it is not necessary to determine whether the ministerial regulations comply with the requirements under normal circumstances.

◎Guanyu Kijun

When using electronic products, you must ensure that the technical standards specified by the industry ministerial regulations are met.
　
In the ministerial ordinance for standardization of technical standards for electrical appliances and equipment, which is also referred to as "performance specification", please provide an explanation of the technical standards for technical standards for electronic equipment.

In this case, there are other countries' standards, Japanese standards, demand-based standards (Electrical Equipment Safety Law), etc.

◎Unnecessarily prepared mood

Under the following circumstances, there is no need to confirm the conformity of the technical standards, but please note that there are other circumstances other than the trial production or process, and there are no plans for the production process.

• When this product is manufactured or used for specific purposes, it is approved by the Minister of Industry.
  • travel model
  • electric battery
  • antique lighting
  • Electronic equipment “old goods”
• Trial production or introduction time
• Manufacture or start of electrical appliances from the customer's doorstep

3. Compatibility criteria (Article 9 of the Electronic Security Act)

Specific electrical equipment manufacturers or developers, employment standards, industry standards, detailed information on each type of industry, and how to get the right fit. Conformance book demand storage period.

In addition, if the manufacturer comes to us, the manufacturer will obtain a copy of the applicable testimonials and issue a duplicate copy of the applicable testimonials, which will be monitored by the manufacturer. However, if the copy of the copy is not stamped, then the copy must be certified as the original.

4. Responsibilities such as duty (Article 8, Subsection 2 of the Telecommunications Act)

The company's responsibility is to determine whether or not the electrical equipment is suitable for production or development, and to record the production process and preserve the process.

5. Specification duties

When the company's electronic equipment is produced, the above-mentioned ownership duties are based on the demand, and the standards set by the Ministry of Industry Regulations are used to track the progress of the electrical equipment.
　
Items below demand details.

• Sign
• Company name
• Mechanical name (for use in specific electrical appliances)
• Information on constant voltage, constant current, etc.

6. Sell

Electrical equipment production, operation or purchaser, unrecognized 5. At specific time, impossible to operate.

“PSE matching test” and “PSE independent test” is it?

First of all, the basic premise is that PSE is not suitable for demand acquisition or obtaining permission in the East and West.
Therefore, based on the principle of independent judgment, the product is subject to the judgment of the relevant industry and the PSE situation, etc.
As a result, businessmen must take responsibility for their own internal decisions and plan their own actions.
　
In this case, there are "PSE compliant test" and "PSE independent test" and different situations.
First of all, as mentioned above, check the progress of the comprehensive product and check the progress of the manufacturing process.
Then, the PSE plans to proceed with the products, and the demand for ownership will proceed independently. .
Among them, "external view test", "complete resistance test" and "transmission test" are essential steps.

Should I pay attention to the demand for AC equipment?

AC adjustment equipment production, various electrical products, demand acquisition PSE certification.
Among them, there are 116 items for specific electronic devices.

AC distribution equipment includes wiring equipment categories, details below.

electric power

1. 125V
2. Super long 125V

constant current

1. Unsurpassed 1A
2. Super-long 1A, but not super-long 3A
3. Super-long 3A, but not super-long 7A
4. Super-long 7A, but not super-long 10A
5. Super long 10A

Power side connection shape

1. Blade type (comprehensive blade type)
2. Spiral type (comprehensive swan type)
3. Other types

Shape of connection part

1. Blade type (comprehensive blade type)
2. Spiral type (comprehensive swan type)
3. Other types

main structural material

1. Synthetic resin
2. Other materials

switch

1. will get
2. will get

Intermediate origin (comprehensive intermediate origin end)

1. will get
2. 无

We provide payment service for PSE certification

In terms of AC configuration, the details of the above-mentioned categories are determined, and according to the ministerial regulations and notices, the safety and security examinations, certifications, and availability of PSE certifications are provided.　
　
PSE certification has a high level of professionalism, and there are few administrative personnel who have complete knowledge and small business practices.
　
However, we provide wireless electrical connection, legal service basis, and the basis for our production, business, and business agents to Japan's administrative agencies.
　
Our teams are present in all prefectures across the country. You must receive additional information from our system.